 |
|
| M23053/1 |
|
| Used for insulation, strain relief, and abrasion protection on cable
harnesses and wire bundles in military and aerospace industries. Provides fluid and
solvent resistance, including lubricating oil, aviation and ground-vehicle fuels and
hydraulic fluids. Neoprene remains flexible at low temperatures |
|
|
|
|
|
|
|
|
| M23053/4 |
|
| Designed for general purpose applications such as the
insulation and strain relief of electrical connections and terminations, light-duty
harnessing, jacketing and bundling. Adhesive lining forms an environmental
seal that helps protect against moisture. |
|
|
|
|
|
|
|
| M23053/5 |
|
| Flexible, flame retardant heat shrinkable polyolefin tube. It is designed for
a wide range of applications requiring high heat-resistance, including insulation for electric &
electronic devices, wire strain relief and protective covering for parts such as resistors and
capacitors. |
|
|
|
|
|
|
|
|
| M23053/6 |
|
| Designed for wire strain-relief applications-terminations, wire
splices, soldered or crimped connections. Provides tough and high abrasion
resistance for delicate components in mechanical environments. |
|
|
|
|
|
|
|
| M23053/8 |
|
| Semi-rigid, flame retardant, heat shrinkable polyvinylidene fluoride
(PVF2) tube for applications requiring outstanding abrasion and cut-through
resistance. It reliably protects wires, solder joints, terminals, connections and
components from most industrial fuels, solvents and chemicals. |
|
|
|
|
|
|
|
|
| M23053/11 |
|
| Flame retardant fluorinated ethylene propylene tube. Works wells as a
protective sleeving and can be used to thoroughly encapsulate parts if required. |
|
|
|
|
|
|
|
| M23053/12 |
|
| Flame retardant heat shrinkable polytetrafluoroethylene tube. It is
designed for a wide range of applications requiring high heat-resistance. |
|
|
|
|
|
|
|
|
| M23053/13 |
|
| M23053/13 is a heat shrinkable, flexable, fluoroelastomer sleeving that is used in high temp applications or where exposure to aggressive solvents is expected. It is widely used in hydraulic equipment, aircraft manufacture and ship building. |
|
|
|
|
|
|
|
| M23053/14 |
|
| Flame retardant heat shrinkable ethylene-tetrafluoroethylene tube, similar to M23053/11 except that it has a higher tensile strength. It is used for high abrasive
applications and is much stiffer than M23053/11 |
|
|
|
|
|
|
|
|
| M23053/16 |
|
Flexible elastomer polyolefin tubing, resistant to aviation and
diesel fuels, hydraulic fluids and lubrication oils. It reliably protects wires, solder
joints, terminals, connections and components from most industrial fuels, brasion
and mechanical damage. |
|
|
|
|
|
|
|
| M23053/18 |
|
| Flexible, thin wall, flame retardant, heat shrinkable
fluoride (PVdF) tube. It is designed for
cut-through resistance. It reliably protects wires, solder
and components from most industrial fuels, solvents and chemicals. |
|
|
|
|
|
|
|
|
| M22129/ |
|
M22129 is a non-shrink, flame retardant polytetrafluoroethylene tube. It is
designed for a wide range of applications requiring high heat-resistance. |
|
|
|
|
|
|
| M81914/ |
|
| M81914 Convoluted Tubing comes in ETFE/FEP/PTFE |
|
|
|
|
|
|
|
| Heat Shrink Tape |
|
| Heat shrink tape is an environmental friendly heat melted adhesive lined cross-linked polyolefin
tape. This product is used primarily for the electrical repair industry. |
|
|
|
|
|
|
| Heat Shrink Wire Markers |
|
| GAMMA-MARK markers are conveniently available in a 2:1 and 3:1 shrink ratio. The 2:1, MARK-221, is thick, rugged and easy to handle. The 3:1, MARK-321, is light weight, fast shrinking, versatile sleeve, which allows for the reduction in inventory. |
|
|
|
|
|
|
|
| Spiral Wrap |
|
| ZEUS SPIRAL-CUT CABLE WRAPS are expandable abrasion-resistant wraps for harnessing and insulating wires, cable, and bundles. ZEUS SPIRAL CUT CABLE WRAP isextruded to close tolerances and then precision cut. |
|
|
|
|
|
